300Liter Flat-plate Thermo Solar Water Heater
1,Withstanding P:0.6Mpa
2,Integrated system
3,Suit for hot area
4,Easy installation
Flat-plate Thermo Solar Water Heater is a tank of roof-mounted system,using the thermosiphon principle to transfer heat from collector to water inside tank.The thermosiphon coating:selective absorb coating and hot water rises.The collectors are coated with a heat-absorbent surface which absorbs the sun rays and heats the fluid in the collector.As the fluid heated,it rise the top of the collector panel and into the tank where it displaces cooler fluid which flows in to the bottom of the collector panel where the process is repeated.
The more temperature difference between the fluid in the collector panel and water in the tank,the faster flowing and heat exchanging
1. Safe and steady
Flat plate solar collector uses all cooper fluid tube; System operating is steady; components are not easy to be damaged;
2. Pressurized operating
Working pressure is 0.6Mpa; designed pressure is 1.2Mpa; the hot water is forced to stream out from the top; it is convenient to use.
3. High heat efficiency
Absorbing coating of the collector is black chrome and blue sputtering; absorbing rate is 92-96%, and emission rate is 5%-15%; heat efficiency is high
4. Good temperature preservation
Thickness illustration layer is 50mm; constant temperature high pressure quantitative foam; less than 5 Celsius Degree per 24
5. Long using life
Inner tank is 1.2-2.0mm stainless steel; resist high temperature and corrosion; 15 years using life.
6. Several models fulfill different user need
According to customers’ requirement, we put our several modes with different specifications to suit flatlet, villa, hotel and factories. , etc
7. Easy installation
